None of the devices running trailblazer actually need all these daemons
or firmware. Move almost everything to recommends so that users can free
up space and so that customised images can be built with
--no-recommends.
Since there are some folks already using trailblazer who DO depend on
these packages, let's try letting users know about this at least.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6239
Add device package for barnesnoble-encore, aka Barnes & Noble Nook Color. Device tree and initial stab at panel driver will be added as a separate commit to the mainline omap kernel.
new file: device/testing/device-barnesnoble-encore/APKBUILD
new file: device/testing/device-barnesnoble-encore/deviceinfo
new file: device/testing/device-barnesnoble-encore/modules-initfs
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6486
The DTS patches for it do not apply anymore, and exkc has said that
their device is now broken, so they are unable to continue maintaining
the port.
As a stop-gap solution, xiaomi-once users who still wish to use
postmarketOS can use the p212 port. They are also welcome to fix the
devicetree patches and upstream them.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6412
Xiaomi didn't ship some firmware in the vendor partition, so i needed to package that firmware by myself, at that point i had some reports that in some devices (or some android versions) they were missing some firmware, so i would rather go back to package the firmware in a different package
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6429
Mainline port supports all features currently available on the
platform, bringing whyred in line with the best supported devices
on the sdm660 kernel.
Working:
* framebuffer display
* regulators
* volume/power keys
* gpio hall sensor
* battery fulegauge & charger
* PMIC vibrator
* PMIC WLED backlight
* notification LED
* storage: eMMC, SD cards
* USB (only USB2 and only gadget mode, like the rest of the platform)
* hardware video enocder/decoder (venus)
* WCN3990 Bluetooth, Wi-Fi
* Synaptics rmi4 touchscreen
* Display (mdss), GPU Adreno 509
* LCD IPS video mode panel (Tianma TD4310)
* sensors are automagically supported too
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6469
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
The currently shipped firmware only worked on early EVT and DVT1
devices, because it is unsigned.
Signed firmware, to enable support for 8.0 was uploaded a long
time ago, but the firmware package was not bumped.
With this bump now all variations of otter are supported:
- EVT
- DVT1
- DVT2
- 8.0 (MP)
- 8.1 (MP)
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6454
[ci:skip-build]: already built successfully in CI
The initfs compression was a leftover from when the device aport
was using the sdm845 mainline kernel (as we played with the otter
bringup there).
This resulted in causing the device to not boot.
Also remove the kernel cmdline as it is already handled by getty.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6455
[ci:skip-build]: already built successfully in CI
The device has seen a decent amount of work put into it and is usable
on a basic level. Many features unfortunately remain unavailable, but
the device fulfills the wiki requirements to be moved to community, so
let's do that to increase visibility.
The PXA1908 firmware package and the U-Boot package are moved together
with the device packages.
[ci:skip-vercheck]
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6409
[ci:skip-build]: already built successfully in CI
As many other downstream kernels, this needs to depend on linux-headers
to fix:
In file included from /home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/scripts/sortextable.c:31:
/home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/tools/include/tools/be_byteshift.h:4:10: fatal error: linux/types.h: No such file or directory
4 | #include <linux/types.h>
| ^~~~~~~~~~~~~~~
It also needs xz:
/home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/scripts/xz_wrap.sh: exec: line 23: xz: not found
Related: https://builds.sr.ht/~postmarketos/job/1477748#task-pmbootstrap_build-583
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6446
[ci:skip-build]: already built successfully in CI
Caleb Connolly