Alpine does not use setup-udev anymore and provides the same
functionality through setup-devd. The setup-udev script was deleted [1]
but postmarketos-base still used it and caused pmbootstrap to fail when
building a device image. Use the rc-service setup directly from
setup-devd.
[1] https://gitlab.alpinelinux.org/alpine/aports/-/commit/b56c4c2b9ddea6007c5e4349f97310a1538f29b6
Adjust UIs that pre-install megapixels (not megapixels-gtk3) to also
recommend using postprocessd. This pulls in opencv, but overall improves
the usability of megapixels a lot so it seems worth installing by
default.
[ci:skip-vercheck]: _pmb_recommends doesn't need a pkgrel bump
dzImage generation tool for Tizen devices. The same dzImage format is
used in all Samsung's Tizen devices (Spreadtrum, Qualcomm, Exynos), so
we pick the latest script from the Tizen's Exynos kernel package.
Prior to this commit, the initramfs was unable to resize the root
partition if it was on a device backed by the device mapper. This commit
fixes that now that it is possible for the root partition to lie on a
device mapper device.
While GNOME does require hardware acceleration, GNOME's X11 mode
(not sure about Wayland mode) does work without DRM support, so
it works fine with software rendering on devices without a working
GPU as long as fbdev works.
I think this raises the question of whether we should rename
pmb:hw-accel to pmb:drm as e.g. Phosh should work without 3D
acceleration if a device e.g. uses a kernel with SimpleDRM support,
but that is out of scope for this MR/commit.
Effectively reverts 638362de63
[ci:skip-vercheck]
Fixes 02dfe83c4b
The previous `provides="mkinifs=3.6.0"` was a requirement because alpine's
kernels had a minimum dependency in `mkinitfs>=3.6.0` to make sure that
support for compressed modules existed. That requirement is no longer
in place[1], since the dependency is now on the `initramfs-generator`
virtual package. Also, since `initramfs-generator` is a virtual package
and not a real package, versioning it might mess up APK. The documentation
explictly states that virtual packages are those with unversioned provides
and a provider_priority. So to avoid having problems in the future, let's
strictly stick to it.
[1] https://gitlab.alpinelinux.org/alpine/aports/-/commit/4fac61c826cac81af72e095b645098900d3094a1
Alpine provides a 'initramfs-generator' thing now that the alpine
linux-* depend on explicitly. This sets postmarketos-mkinitfs to be the
preferred provider of that virtual package.
Fixes:
ERROR: unable to select packages:
postmarketos-mkinitfs-1.4.1-r5:
conflicts: mkinitfs-3.6.1-r2[mkinitfs=3.6.0]
satisfies: postmarketos-base-20-r1[postmarketos-mkinitfs]
postmarketos-base-nofde-20-r1[postmarketos-mkinitfs]
.pmbootstrap-20220610.215815[postmarketos-mkinitfs]
.pmbootstrap-20220610.215815[mkinitfs]
mkinitfs-3.6.1-r2:
conflicts: postmarketos-mkinitfs-1.4.1-r5
satisfies: .pmbootstrap-20220610.215815[mkinitfs]
linux-rpi-5.15.45-r1[initramfs-generator]
.pmbootstrap-20220610.215815:
masked in: cache
satisfies: world[.pmbootstrap=20220610.215815]
Also see:
30d7b88324 (aports) main/mkinitfs: provide initramfs-generator
4fac61c826 (aports) main/linux-lts: replace mkinitfs with initramfs-generator
There was lately a discussion upstream due to apk 2.12.10 breaking
some packages in aports[1]. The conclusion in IRC is that provides
were designed to be either versioned or have a provider_priority.
Otherwise, the provides will be treated as a "virtual package".
Which is not what we want here.
[1] https://gitlab.alpinelinux.org/alpine/apk-tools/-/issues/10847
The patch was meant well. But there are problems with yelp in its
current form in postmarketOS:
* It's practically empty. In the default install, there is only one
application that has some sort of help text, which is Chatty. But
when you click on the entry, there is only one line of generic
information about the app. Not useful for users.
* Yelp is not adapted for small screens, the one line of help text is
cut off on the PinePhone.
So let's not ship it by default in edge and v22.06 for now.
This reverts commit 5ef50b12f2.
[ci:skip-vercheck]: modifying _pmb_recommends doesn't need a version
bump.
At the moment, mkinitfs loads some file system modules always (ext4),
some dynamically (brtfs) and some not at all (f2fs, vfat), expecting
them to be built-in.
To support generic kernels (e.g. from Alpine) properly, use the
partition type detection for both boot and root partition and always
load the necessary modules before mounting.
An increasing number of devices relies on the vfat file system in the
initfs (e.g. for UEFI boot). Having to add all the modules required for
it to work to deviceinfo_modules_initfs is annoying and inconsistent,
in particular for the additionally chosen "nls" modules. Since we
already bundle several file systems by default, let's just add vfat
as well to simplify this.
Ideally mkinitfs should detect the file systems chosen at install time
in the future and only include the necessary modules, but until then
this just adds a couple of kilobytes to the initramfs.
closes#1515
This patch HAS NOT been tested to see if it actually fixes#1515. I do
not have my pinephone keyboard with me and will not till v22.06 is out.
Can someone please test this patch before merging?
Note: this is being merged upstream but needs a refactor of the
Makefile. See:
https://lists.sr.ht/~mil/sxmo-devel/patches/32630
Since we cannot get the refactor of the Makefile out before the next
release, this is the next best thing
[ci:skip-build] already built successfully in CI.
This replaces the previous `udevadm test` hack with a combination of
`udevd`, `udevadm trigger` and `udevadm settle` in order to coldplug all
available devices and make them available for use via libinput / unl0kr.
Relates to: #1411
[ci:skip-build] already built successfully in CI
We decided against pvr hacks, quoting craftyguy from issue 1316:
> We discussed this in our team meeting, and ultimately decided that
> supporting pvr in pmaports/pmOS has many of the same problems that
> we saw when trying to support hallium/libhybris, something we
> decided against. For much of the same reasons, we've decided that we
> want to avoid adding the proprietary userspace components required to
> support pvr in pmOS.
No device port is using this package anymore, but we forgot to remove
it. After branching v22.06 I realized that it doesn't build anymore
and as stated in MR 2702, it's unmaintained.
Related: https://builds.sr.ht/~postmarketos/job/767700
Fix the build failure when built with newer gcc:
/home/pmos/build/src/gcc-6.4.0/gcc/config/i386/i386.c: In function 'int function_arg_advance_32(CUMULATIVE_ARGS*, machine_mode, const_tree, long int, long int)':
/home/pmos/build/src/gcc-6.4.0/gcc/config/i386/i386.c:8743:18: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
8743 | bool error_p = NULL;
| ^~~~
Patch source: https://svnweb.freebsd.org/ports/head/lang/gcc7/files/patch-gcc_config_i386_i386.c?view=markup&pathrev=545751
Fix the build failure when built with newer gcc:
/home/pmos/build/src/gcc-4.9.2/gcc/reload1.c:89:24: error: use of an operand of type 'bool' in 'operator++' is forbidden in C++17
89 | (this_target_reload->x_spill_indirect_levels)
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
/home/pmos/build/src/gcc-4.9.2/gcc/reload1.c:444:7: note: in expansion of macro 'spill_indirect_levels'
444 | spill_indirect_levels++;
| ^~~~~~~~~~~~~~~~~~~~~
Patch source: https://github.com/ChrisMacGregor/esp-open-sdk/blob/master/1001-fix-reload1-compile-error.patch
This should be reverted when this Alpine issue has been closed:
https://gitlab.alpinelinux.org/alpine/aports/-/issues/13778
sxmo-common already had this for some reason.
[ci:ignore-count]
[ci:skip-build] Already built successfuly on CI in MR
the networkmanager package in alpine was refactored and the wifi and
wwan components were split off into separate subpackages. without these,
wifi and wwan networking are broken.
also see: aports 830af82c6c
[ci:ignore-count]
This code wasn't actually working for me on samsung-m0, so I
investigated and came up with that this fixes it. I'm not sure if you
are supposed to be able to omit the deviceinfo_ prefix? Either way, it
doesn't seem to work, so let's fix it.
Fixes fad7c7ef8e
XWayland is a phosh dependency. Having it in pmb_recommends adds
nothing and can be confusing, since power users would expect that
removing it from world would remove the package. That will never
be the case since phosh depends on it.
[ci:skip-build] already built successfully in CI
Adding bluez to "depends" in order to enable bluetooth service (doesn't
work on packages in "_pmb_recommends").
Adding blueman to "_pmb_recommends" to allow uninstallation by the
user.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1465
Dylan Van Assche