lock.sh is only reliable when used with i3wm, where we disable gpio_keys from
being handled by X/i3wm. When this is not done (e.g. when testing a different
X11 UI), the script becomes unreliable since the display turns on due to the
SCREENLOCK key being toggled, and therefore only the display=on case is ever
run.
Improve reliability of the script by basing the decision making on the
enabled/disabled state of the touchscreen instead.
Current pinephone images built pmbootstrap >= 3.0.0 don't boot on the
pinephone anymore. At least part of this must be the switch from GPT to
MBR that has been done by default in pmbootstrap. Set msdos explicitly
to revert this for the pinephone.
With Tow-Boot we could probably use GPT instead, but this should be a
well-tested, concious decision. Let's fix this regression first.
[ci:skip-build]: already built successfully in CI
This adds Xiaomi Pad 5, it uses a close to mainline kernel on 6.12.0
the firmware is packaged and supported, although hexagonrpcd is not working yet.
this is a continuation from
https://github.com/map220v/postmarket_xiaomi_nabu/tree/test
updating its config and updating its components.
i based the hexagonrpcd bringup from xiaomi-elish and google-sargo
[ci:skip-build]: already built successfully in CI
Added a config file to /etc/unl0kr.conf.d/ to fix issue with unl0kr
being invisible during boot.
Commit-Msg-Tweaked-By: Oliver Smith <ollieparanoid@postmarketos.org>
lafrite has u-boot in SPI already
it also prevents lafrite from booting because pmbootstrap uses GPT partitioning now.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Fixes the problem that BOOT partition is only 10 MB big while boot.img is 13 MB now.
Also heimdall was stuck at 7% with the sparse flag this gets fixed.
[ci:skip-build]: already built successfully in CI
As @grimler stated in MR !5887 (comment) [1], samsung-jackpotlte,
samsung-xcover4lte, and samsung-a30 share the same name for Wi-Fi
proprietary blobs, and packaged in their own specific firmware package.
The problem is these firmware packages put files in the same directory
as `firmware-samsung-a51`: /lib/firmware/postmarketos/mx140/. This opens
up the probability of conflicting blobs when multiple firmware packages
are installed on the system, resulting in wrong blobs used.
To ensure that this firmware is located in its own directory, move
`samsung-a51` blobs into its own subdirectory. This way, `a51` blobs
will stay intact whether multiple firmware packages are installed.
[1] https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/5887#note_459185
Successfully built and booted postmarketOS on Samsung Galaxy A51. It's based on Exynos 9611 SoC.
Currently, these are tested working:
- Boots from internal storage
- Display (DECON driver needs to be patched. Included in the kernel package)
- Framebuffer (additionally with msm-fb-refresher to refresh the screen)
- Touchscreen
- USB Networking (RNDIS)
- Wi-Fi
Tested UI environments: XFCE 4 & Console.
Wiki: https://wiki.postmarketos.org/wiki/Samsung_Galaxy_A51_(samsung-a51)
The Linux stable team merged v6.12 into linux-rolling-stable as
of Thursday, so here's a new release.
This release cycle was very quiet with small fixes.
The ttynull driver was enabled in the configuration to fix a bug
where userspace would start with no stdio open.
A patch that made the fuel gauge driver compatible with v6.10
was dropped.
Patches from MSM8916 and MSM8953 were re-picked, to include the change
from strlcpy to strscpy and to remove duplicate q6voice entries in a
Makefile.
Some flashlight and charging patches were staged.
The thermal nodes were sorted by the thermal sensor to match
other platforms.
Bluetooth, camera, call audio, display, USB, I2C, eMMC, modem, video
acceleration, WiFi, haptics, NFC, sensors, and touchscreen should
work and be slightly broken like before.
After commit 8335d050bf24977afefee6612dd347abd555bc53 in pmbootstrap the
partition table now defaults to GPT instead of MBR. This breaks booting
on Amlogic devices for the following reasons:
* On set-top boxes: downstream U-Boot most likely does not have GPT
support
* On boards where we install mainline U-Boot as BL33 on eMMC/SD: the
bootROM checks for an `@AML` image header at offset 512 (second LBA),
which means we are basically stuck on MBR
Some Amlogic boards have U-Boot + the proprietary Amlogic firmware
stages in SPI flash (mainly the Libre Computer boards do), which means
they can use GPT, because the firmware is simply not stored on eMMC/SD.
For that reason I chose not to change the partition table on those.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Merge the following Samsung Galaxy Grand Prime devices into
samsung-fortuna:
- samsung-fortuna3g
- samsung-fortunaltezt (firmware only due to armv7 architecture)
- samsung-gprimeltecan
- samsung-grandprimelte (was samsung-gprimeltexx)
Resolves deadlock between Rockchip crypto hardware and dm-crypt causing
kernel panic during disk decryption on devices like PinePhone Pro.
- Disables RK3399 hardware crypto engine (CONFIG_CRYPTO_DEV_ROCKCHIP)
- Enables ARM64 CPU crypto extensions for AES/SHA
- Makes core crypto components built-in instead of modules
Fixes: kernel panic in queued_spin_lock_slowpath() when accessing
encrypted devices.
[ci:skip-build]: already built successfully in CI
Ferass El Hafidi