The full initramfs is now too big for the boot partition.
When building with the downstream kernel, use initfs-extra
to split the initramfs so it can fit again.
This is not an issue with mainline kernel since booting it
uses extlinux with lk2nd.
[ci:skip-vercheck]
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
[ci:skip-build]: already built successfully in CI
Like most msm8974 devices, lk2nd is used to boot mainline linux on the
HTC One (M8).
Add it as a dependency of the mainline kernel build, so that it is built
when required. It can be flashed with 'pmbootstrap flasher flash_lk2nd'
while in the vendor bootloader fastboot mode.
Only extlinux mode is supported for mainline kernel, as otherwise the
initramfs is too big for the boot partition.
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Add the imagis and 88pm886_regulator drivers to the initfs allowing the
software keyboard in the debug shell to work.
[ci:skip-build]: already built successfully in CI
Otherwise the service will be installed even if the mainline kernel is
selected.
Fixes: f59eac28b ("firmware-samsung-pxa1908: move openrc scripts to subpackage (MR 5688)")
Convert the device package to use U-Boot.
The U-Boot binary is gzipped and put into a U-Boot legacy uImage to
match what the factory bootloader's demands. The postmarketOS kernel,
initramfs and device tree are packed into a FIT and passed to U-Boot as
an initramfs.
Basically linux-postmarketos-marvell-dove but with fellow changes :
1. Added support for other marvell SoC
2. The local version has been changed to -postmarketos-marvell
3. Several redundant USB controller driver has been removed
4. CONFIG_SATA_MV is seted to y
5. fbdev is disabled
6. CONFIG_ZRAM_BACKEND_ZSTD it enabled
(due to kconfig config but i also enabled CONFIG_ZRAM_BACKEND_LZ4 and
others)
7. neon is enabled
Add soc-qcom-sm7125, firmware-xiaomi-miatoll, hexagonrpcd as dependency.
This necessary to make Wi-Fi, Sensors, GPU and modem work.
Split device package to support panel variants and take
maintainership.
Successfully built and booted postmarketOS on Samsung Galaxy J4.
It's based on Exynos 7570, same SoC used by samsung-xcover4lte [1].
Currently, these are tested working:
- Boots from internal storage
- Display (console framebuffer is NOT working, kernel panics)
- Framebuffer (additionally with msm-fb-refresher to refresh the screen)
- Touchscreen
- USB Networking (RNDIS)
- Wi-Fi
Tested UI environments:
- XFCE 4
- Console (Kernel log doesn't show up because
`CONFIG_FRAMEBUFFER_CONSOLE` is not enabled, but enabling it panics
the kernel. This is a known issue for some Samsung devices, notably
samsung-crownlte [2].)
[1] https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Xcover_4_(samsung-xcover4lte)
[2] https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Note_9_(Exynos)_(samsung-crownlte)#Current_status
This adds Xiaomi Pad 5, it uses a close to mainline kernel on 6.12.0
the firmware is packaged and supported, although hexagonrpcd is not working yet.
this is a continuation from
https://github.com/map220v/postmarket_xiaomi_nabu/tree/test
updating its config and updating its components.
i based the hexagonrpcd bringup from xiaomi-elish and google-sargo
[ci:skip-build]: already built successfully in CI
Added a config file to /etc/unl0kr.conf.d/ to fix issue with unl0kr
being invisible during boot.
Commit-Msg-Tweaked-By: Oliver Smith <ollieparanoid@postmarketos.org>
lafrite has u-boot in SPI already
it also prevents lafrite from booting because pmbootstrap uses GPT partitioning now.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Fixes the problem that BOOT partition is only 10 MB big while boot.img is 13 MB now.
Also heimdall was stuck at 7% with the sparse flag this gets fixed.
[ci:skip-build]: already built successfully in CI
Barnabás Czémán