snlavaise/pmaports-rtwo
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
10,804 Commits 1 Branch 0 Tags
6a341b8e75fcb68ae4a653d7a301673d2c9cfee5
Commit Graph
3079 Commits
Author SHA1 Message Date
postmarketOS CI 7f14263f57 linux-next: upgrade to next-20250429 2025-04-29 15:56:06 +00:00
postmarketOS CI 325bbcddbd linux-next: upgrade to next-20250428 2025-04-28 16:00:11 +00:00
Alexander Martinz 862f6a0919 firmware-shift-otter: add support for 8.0 and 8.1 
The currently shipped firmware only worked on early EVT and DVT1
devices, because it is unsigned.

Signed firmware, to enable support for 8.0 was uploaded a long
time ago, but the firmware package was not bumped.

With this bump now all variations of otter are supported:
- EVT
- DVT1
- DVT2
- 8.0 (MP)
- 8.1 (MP)

Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6454
[ci:skip-build]: already built successfully in CI
 2025-04-27 16:06:15 +02:00
Barnabás Czémán 73e6d02c1d xiaomi-kenzo: archive device specific packages 
Archive Redmi Note 3 kernel, device and firmware package
in favor of device-qcom-msm8956

Signed-off-by: Barnabás Czémán <barnabas.czeman@postmarketos.org>
[ci:skip-vercheck]
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/5694
[ci:skip-build]: already built successfully in CI
 2025-04-27 16:02:54 +02:00
Barnabás Czémán 9ca4170417 device-qcom-msm8956: new device 
Add generic port for MSM8956/MSM8976 based devices.

Signed-off-by: Barnabás Czémán <barnabas.czeman@postmarketos.org>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/5694
 2025-04-27 16:02:54 +02:00
Barnabás Czémán f87489e471 linux-postmarketos-qcom-msm8956: initial package 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/5694
 2025-04-27 16:02:54 +02:00
Alexander Martinz 95518b7a66 device-shift-otter: remove initfs compression and kernel cmdline 
The initfs compression was a leftover from when the device aport
was using the sdm845 mainline kernel (as we played with the otter
bringup there).

This resulted in causing the device to not boot.

Also remove the kernel cmdline as it is already handled by getty.

Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6455
[ci:skip-build]: already built successfully in CI
 2025-04-27 15:59:39 +02:00
Alexander Martinz 383e4bcd1a device-shift-otter: depend on unl0kr-fbforcerefresh 
We need to refresh the fb to show unl0kr on bootup.

Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6455
 2025-04-27 15:59:38 +02:00
Duje Mihanović bb34939bc7 samsung-coreprimevelte: move from testing to community 
The device has seen a decent amount of work put into it and is usable
on a basic level. Many features unfortunately remain unavailable, but
the device fulfills the wiki requirements to be moved to community, so
let's do that to increase visibility.

The PXA1908 firmware package and the U-Boot package are moved together
with the device packages.

[ci:skip-vercheck]

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6409
[ci:skip-build]: already built successfully in CI
 2025-04-27 15:55:07 +02:00
Duje Mihanović 46a3a0a7ce linux-samsung-coreprimevelte: configure for community 
Change the kernel config to pass the community kconfig check.

Also update the local build version to use the flavor instead of just
-postmarketOS.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6409
 2025-04-27 15:55:02 +02:00
Caleb Connolly 07e2bf526c linux-next: switch to CONFIG_HZ_1000 
250 is not a lot, let's try this out i guess. if it's bad we can switch
back??

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6393
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]
 2025-04-25 15:43:56 +03:00
postmarketOS CI ca2f28ec05 linux-next: upgrade to next-20250424 2025-04-25 04:55:43 +00:00
Clayton Craft ec2c2564e0 device-alcatel-ttab: update checksums 
[ci:skip-vercheck]

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6447
 2025-04-24 12:35:15 -07:00
Oliver Smith 6530fb7496 linux-alcatel-ttab: fix missing deps 
As many other downstream kernels, this needs to depend on linux-headers
to fix:

In file included from /home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/scripts/sortextable.c:31:
/home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/tools/include/tools/be_byteshift.h:4:10: fatal error: linux/types.h: No such file or directory
    4 | #include <linux/types.h>
      |          ^~~~~~~~~~~~~~~

It also needs xz:

/home/pmos/build/src/android_kernel_alcatel_ttab-1795ea3c237773d32616954a03738d67d209a8d7/scripts/xz_wrap.sh: exec: line 23: xz: not found

Related: https://builds.sr.ht/~postmarketos/job/1477748#task-pmbootstrap_build-583

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6446
[ci:skip-build]: already built successfully in CI
 2025-04-24 11:48:22 -07:00
Error504TimeOut 1b69da9511 alcatel-ttab: new device 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6422

[ci:skip-build]: already built successfully in CI
 2025-04-24 18:20:34 +02:00
Affe Null 2504124b25 jolla-c2: new device 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6426

[ci:skip-build]: already built successfully in CI
 2025-04-24 18:12:29 +02:00
postmarketOS CI 20c37ca9fd linux-next: upgrade to next-20250423 2025-04-23 15:56:30 +00:00
Anton Bambura 9294392f75 device-amlogic-tvbox: disable dhcpd 
These devices have an ethernet port, therefore from the wiki:

Do not set the static ip to the network interface and do not run the
DHCP daemon on it. This makes sense for devices with an ethernet
port, like the Raspberry Pi (!1580).

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6435
 2025-04-23 12:52:26 +00:00
d2 c858786e73 xiaomi-rosemary: new device (Xiaomi Redmi Note 10S) 
Wiki page: https://wiki.postmarketos.org/wiki/Xiaomi_Redmi_Note_10S_/_POCO_M5s_(xiaomi-rosemary)

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6430
[ci:skip-build]: already built successfully in CI
 2025-04-23 15:35:28 +03:00
iAboothahir ff3c929a05 firmware-asus-x00td: Clean-ups 
* msm-firmware-loader loads fws from partitions and add board-2.bin
* create firmware-5.bin directly in the package

Signed-off-by: iAboothahir <aboothahirpkd@gmail.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6431
[ci:skip-build]: already built successfully in CI
 2025-04-23 15:31:59 +03:00
iAboothahir c805081e64 asus-x00td: move downstream port to unmaintained 
device-asus-x00td:
 * Add firmware-qcom-adreno-a530 for adreno fws
 * Add msm-firmware-loader to load fws from device partitions

Signed-off-by: iAboothahir <aboothahirpkd@gmail.com>
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6431
 2025-04-23 15:31:32 +03:00
Henrik Grimler 95fe04886c device-samsung-m3: use msdos partition type 
If a custom bl1 is used on sdcard, then it should be embedded at
0x200 (512). If a GPT filesystem is used, then the GPT header uses
roughly the first 0x500 bytes, and hence bl1 overwrites part of the
GPT header in that configuration.

Change to msdos partition type so that the filesystem works fine
whether or not we use stock bl1 or custom one.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6442
 2025-04-23 10:45:25 +00:00
Henrik Grimler b42d3861c6 device-odroid-u2: use msdos partition type 
bl1 is embedded at 0x200 (512), but the GPT header uses roughly the first
0x500 bytes, and hence bl1 overwrites part of the GPT header.

Fix issue by changing to msdos partition type.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6442
 2025-04-23 10:45:25 +00:00
postmarketOS CI bc4caf3b2f linux-next: upgrade to next-20250422 2025-04-22 15:56:27 +00:00
Frieder Hannenheim 3a88bde105 device-oneplus-kebab: remove debug kernel args 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6411

[ci:skip-build]: already built successfully in CI
 2025-04-22 15:33:24 +02:00
Frieder Hannenheim b0892d2cbe device-oneplus-kebab: remove weston.ini, only needed for downstream kernel 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6411
 2025-04-22 15:33:24 +02:00
Frieder Hannenheim 4b746b298c device-oneplus-kebab: add mainline kernel 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6411
 2025-04-22 15:33:24 +02:00
Luca Weiss e319a5675b linux-postmarketos-qcom-msm8226: upgrade to 6.13.4 
Manual kconfig changes:
* CONFIG_PSI=y (as required by kconfigcheck)

Part-of: https://gitlab.postmarketos.org/postmarketos/pmaports/-/merge_requests/6416
 2025-04-22 10:36:33 +02:00
Eisenbahnfan 458952ca0c samsung-n2awifi: enable gpu support 
And use modules-initfs and improve Wifi reliability and set myself as maintainer.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6433
 2025-04-21 21:51:55 -07:00
postmarketOS CI ac3a8c403e linux-next: upgrade to next-20250417 2025-04-21 13:05:34 +00:00
Oliver Smith cce5fc272f device-samsung-lt023g: fix call to devicepkg_build 
"$pkgname " was pasted in there by mistake.

Fixes: cfac29e5 ("device-samsung-lt023g: add audio subpkg to install pw")
 2025-04-18 09:53:56 +02:00
Clayton Craft 5075aa3523 device-xiaomi-nabu: add audio subpkg to install pw 
This also relocates some audio-related config into the new audio subpkg
so that it's only installed in cases where a UI requires audio.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6408
[ci:skip-build]: already built successfully in CI
 2025-04-17 20:50:01 +02:00
Clayton Craft cfac29e5c0 device-samsung-lt023g: add audio subpkg to install pw 
This also relocates some audio-related config into the new audio subpkg
so that it's only installed in cases where a UI requires audio.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6408
 2025-04-17 20:50:01 +02:00
postmarketOS CI fd23d77201 linux-next: upgrade to next-20250414 2025-04-14 15:59:55 +00:00
Omar Mahboubi 36875d85f2 device-xiaomi-spes: new device 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6398

[ci:skip-build]: already built successfully in CI
 2025-04-12 15:13:11 +03:00
postmarketOS CI 8328a37895 linux-next: upgrade to next-20250411 2025-04-11 15:56:32 +00:00
Aster Boese 02434fcd88 linux-postmarketos-apple: upgrade to 6.15.0-rc1 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6392

[ci:skip-build]: already built successfully in CI
 2025-04-11 16:41:11 +02:00
postmarketOS CI 87f71e0265 linux-next: upgrade to next-20250410 2025-04-10 15:59:44 +00:00
postmarketOS CI c54467f9a8 linux-next: upgrade to next-20250409 2025-04-09 15:59:45 +00:00
Luca Weiss b0eb896358 linux-postmarketos-qcom-sc7280: upgrade to 6.14.0 
No manual kconfig changes.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6386
[ci:skip-build]: already built successfully in CI
 2025-04-09 15:26:51 +02:00
postmarketOS CI 6e8bc38bef linux-next: upgrade to next-20250408 2025-04-08 05:00:09 +00:00
Adam Honse 1c08b6d0ff device-samsung-hlte: enable lk2nd 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6384

[ci:skip-build]: already built successfully in CI
 2025-04-07 16:18:44 +02:00
postmarketOS CI f213b76840 linux-next: upgrade to next-20250407 2025-04-07 04:59:46 +00:00
Barnabás Czémán 8cbef8ecdd device-qcom-msm89x7: enable qm215 ad sdm439 
Enable qm215 and sdm439 devices.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6368
[ci:skip-build]: already built successfully in CI
 2025-04-05 16:44:14 +02:00
Barnabás Czémán a6292e3187 linux-postmarketos-qcom-msm89x7: Upgrade to v6.14-r0 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6368
 2025-04-05 16:44:09 +02:00
postmarketOS CI 3f52ee4eeb linux-next: upgrade to next-20250404 2025-04-04 04:56:28 +00:00
postmarketOS CI 233e6c8722 linux-next: upgrade to next-20250403 2025-04-03 15:59:45 +00:00
panpanpanpan eb2391f497 linux-postmarketos-qcom-sm8150: Upgrade to v6.14.0 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6367

[ci:skip-build]: already built successfully in CI
 2025-04-02 16:58:47 +02:00
panpanpanpan 9e5298babd device-xiaomi-nabu: Add a640_zap firmware and small fixes 
Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6367
 2025-04-02 16:58:46 +02:00
Connor Eliffe d8b390202b device-amazon-biscuit: add alsa and pulseaudio configs 
- Add UCM2 configurations for biscuit
- Add udev rule to switch headphone output
- Add asound config
- Add pulseaudio configs

This commit provides a basic pulseaudio setup for biscuit. The device appears
to only support 48kHz audio. Resampled 44kHz audio crackles and pops currently
due to the buffer underrunning. Some more tweaking may be needed to improve
audio playback quality.

Part-of: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/6304
[ci:skip-build]: already built successfully in CI
 2025-04-02 11:57:29 +02:00