Add soc-qcom-sm7125, firmware-xiaomi-miatoll, hexagonrpcd as dependency.
This necessary to make Wi-Fi, Sensors, GPU and modem work.
Split device package to support panel variants and take
maintainership.
Successfully built and booted postmarketOS on Samsung Galaxy J4.
It's based on Exynos 7570, same SoC used by samsung-xcover4lte [1].
Currently, these are tested working:
- Boots from internal storage
- Display (console framebuffer is NOT working, kernel panics)
- Framebuffer (additionally with msm-fb-refresher to refresh the screen)
- Touchscreen
- USB Networking (RNDIS)
- Wi-Fi
Tested UI environments:
- XFCE 4
- Console (Kernel log doesn't show up because
`CONFIG_FRAMEBUFFER_CONSOLE` is not enabled, but enabling it panics
the kernel. This is a known issue for some Samsung devices, notably
samsung-crownlte [2].)
[1] https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Xcover_4_(samsung-xcover4lte)
[2] https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Note_9_(Exynos)_(samsung-crownlte)#Current_status
This adds Xiaomi Pad 5, it uses a close to mainline kernel on 6.12.0
the firmware is packaged and supported, although hexagonrpcd is not working yet.
this is a continuation from
https://github.com/map220v/postmarket_xiaomi_nabu/tree/test
updating its config and updating its components.
i based the hexagonrpcd bringup from xiaomi-elish and google-sargo
[ci:skip-build]: already built successfully in CI
Added a config file to /etc/unl0kr.conf.d/ to fix issue with unl0kr
being invisible during boot.
Commit-Msg-Tweaked-By: Oliver Smith <ollieparanoid@postmarketos.org>
lafrite has u-boot in SPI already
it also prevents lafrite from booting because pmbootstrap uses GPT partitioning now.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Fixes the problem that BOOT partition is only 10 MB big while boot.img is 13 MB now.
Also heimdall was stuck at 7% with the sparse flag this gets fixed.
[ci:skip-build]: already built successfully in CI
As @grimler stated in MR !5887 (comment) [1], samsung-jackpotlte,
samsung-xcover4lte, and samsung-a30 share the same name for Wi-Fi
proprietary blobs, and packaged in their own specific firmware package.
The problem is these firmware packages put files in the same directory
as `firmware-samsung-a51`: /lib/firmware/postmarketos/mx140/. This opens
up the probability of conflicting blobs when multiple firmware packages
are installed on the system, resulting in wrong blobs used.
To ensure that this firmware is located in its own directory, move
`samsung-a51` blobs into its own subdirectory. This way, `a51` blobs
will stay intact whether multiple firmware packages are installed.
[1] https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/5887#note_459185
Successfully built and booted postmarketOS on Samsung Galaxy A51. It's based on Exynos 9611 SoC.
Currently, these are tested working:
- Boots from internal storage
- Display (DECON driver needs to be patched. Included in the kernel package)
- Framebuffer (additionally with msm-fb-refresher to refresh the screen)
- Touchscreen
- USB Networking (RNDIS)
- Wi-Fi
Tested UI environments: XFCE 4 & Console.
Wiki: https://wiki.postmarketos.org/wiki/Samsung_Galaxy_A51_(samsung-a51)
After commit 8335d050bf24977afefee6612dd347abd555bc53 in pmbootstrap the
partition table now defaults to GPT instead of MBR. This breaks booting
on Amlogic devices for the following reasons:
* On set-top boxes: downstream U-Boot most likely does not have GPT
support
* On boards where we install mainline U-Boot as BL33 on eMMC/SD: the
bootROM checks for an `@AML` image header at offset 512 (second LBA),
which means we are basically stuck on MBR
Some Amlogic boards have U-Boot + the proprietary Amlogic firmware
stages in SPI flash (mainly the Libre Computer boards do), which means
they can use GPT, because the firmware is simply not stored on eMMC/SD.
For that reason I chose not to change the partition table on those.
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Merge the following Samsung Galaxy Grand Prime devices into
samsung-fortuna:
- samsung-fortuna3g
- samsung-fortunaltezt (firmware only due to armv7 architecture)
- samsung-gprimeltecan
- samsung-grandprimelte (was samsung-gprimeltexx)
Vitalii Skorkin