In addition to the version upgrade:
1. Drop DTS patch for volume keys. These will be handled via hwdb
2. Drop CONFIG_FW_LOADER_USER_HELPER. It was required by the LED controller
(lp5523) driver until Linux 6.19
3. Restore TWL4030_PWRBUTTON, and make it built-in (in readiness for plymouth)
4. Drop HSI patch. To be replaced with a better quality patch which will be
upstreamed
5. The remainder of changes are from kconfig migrate
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8471>
The codeberg tarball fetch was timing out the verify-checksums CI job
(no bytes received after TCP/TLS handshake for 15 minutes). Switch to
Arnav Singh's GitHub mirror of megi's tree, which mirrors the same tag
(orange-pi-6.18-20260105-0049).
The recorded sha512sum changes because GitHub and Gitea (codeberg)
generate tarballs with different bytes for the same git tag.
Also adjust builddir, since GitHub's tarball top-level directory is
named "<repo>-<tag>" (linux-orange-pi-6.18-20260105-0049/) where
codeberg's was just "<repo>" (linux/).
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8501>
I have kobo-clarahd and tolino-shine2hd.
kobo-clarahd uses the same board as tolino-shine3, but another
pin-compatible but not software-compatible SoC is installed
tolino-shine2hd uses the same SoC as the tolino-shine3.
So if things are working on both of the devices, it is almost
safe to assume that they will also work on the tolino-shine3.
Based on that assumption add me as a maintainer.
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8490>
I have kobo-clarahd and tolino-shine2hd.
kobo-clarahd uses the same board as tolino-shine3, but another
pin-compatible but not software-compatible SoC is installed
tolino-shine2hd uses the same SoC as the tolino-shine3.
So if things are working on both of the devices, it is almost
safe to assume that they will also work on the tolino-shine3.
Based on that assumption add me as a maintainer.
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8490>
I've added support for this device and continue to work on it, so
become maintainer.
Udev rule is just a slight tweak to the one generated by pmbootstrap
when touchscreen details are in deviceinfo, except use the device
name instead of /dev/input/eventX, whose number varies each boot.
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8470>
The kernel package used by this device does not meet the community
kernel version requirements anymore and the maintainer has not responded
to the issue #4448 which notified them of the situation.
Since two weeks have passed without a request for more time, the device
should be moved to testing.
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8398>
1. Modernize the boot parameters uboot passes to the kernel
2. Correct the volume keys. Upstream DTS actually sends F7 and F8 for these
keys, which is the behavior from stock. Using hwdb to correct the keys
allows us to drop the relevant DTS patch from linux-postmarketos-omap.
Additionally add the hwdb database into initramfs to ensure the keys
also work during system initialization
3. Disable OMAP 3430 OFF mode early in the initramfs. This is currently
broken and causes system instability. We previously used a DTS patch to
do this, but using an initramfs hook allows us to reduce the amount of
kernel patches we maintain
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8472>
Version 34 of the device-nokia-n900 package implemented an udev-based script
for shutdown due to critically-low battery condition. Therefore, depending on
UPower is no longer necessary. To keep the i3blocks status bar working in
the absence of UPower, switch back to basic sysfs polling.
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8472>
As of upower 1.91.0, UPower supports config fragments, thus there is no longer
a need to ship a full UPower.conf. The device-specific upower package can
therefore be dropped, and the config fragment will be installed unconditionally
as part of the device package.
NB: It is still necessary to use a custom udev script to initiate poweroff due
to low battery on the N900, since the fuel gauge has a hardware limitation
which results in reporting 0% if the calibration is off, causing unwanted
device shutdowns if UPower's mechanism is active.
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8472>
Provide a unified screen locking mechanism, supporting x11 and sway. Auto
locking is also improved to correctly disable inputs in all screen locking
scenarios, and re-enabling them on unlock. Unlock on keypad slide now also
works on sway (from sway v1.12).
Any x11 UI can use the existing script by setting up appropriate keybinds to
the script and autostarting xautolock. It may be necessary to disable any
built-in autolock method integrated within a specific x11 WM.
NB: This is NOT locking in the sense of secure locking. It is purely for
turning the screen off and disabling some inputs (currently only the
touchscreen) to prevent unintended wakeups.
Signed-off-By: Sicelo A. Mhlongo <absicsz@gmail.com>
Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/8472>
bluebunny