This reverts commit 609f3a5544.
The changes proposed in MR 5983 depend on changes in the upstream sc7150
kernel, howerver a new kernel release is currently not feasible as
instabilities still need to be worked out.
Signed-off-by: Robert Eckelmann <longnoserob@postmarketos.org>
[ci:skip-build]: already built successfully in CI
Add support for Redmi 4 (prada), Redmi 4A (rolex),
Motorola Moto G5S (montana) and Huawei Mediapad T3 10 (agassi).
Remove downstream motorola montana and xiaomi rolex packages.
[ci:skip-build]: already built successfully in CI
The qrtr-openrc package was removed in 94a777390c
but somehow still left in depends of this package.
Fix the errors like:
ERROR: unable to select packages:
qrtr-openrc (no such package):
required by: soc-qcom-sc8180x-nonfree-firmware-openrc-1-r1[qrtr-openrc]
This is the one and only mention of qrtr-openrc package in pmaports.
P.S. It's very telling how many users sc8180x has, if this was unnoticed
for 8 months.
Signed-off-by: Alexey Min <alexey.min@gmail.com>
Generate extlinux config for newer lk2nd and switch to msdos partition type,
since lk2nd doesn't support GPT yet.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
[ci:skip-build]: already built successfully in CI
Replace this deprecated variable with the new equivalent.
[ci:ignore-count]
[ci:skip-build]: armv7 fails in CI (qemu instabilities w/ our runner),
Clayton verified checksums for armv7 stuff manually
This is the port for the Librem 5 devkit, I still have one but haven't
booted it in years and it's unlikely anyone else is using this (since
this port is super outdated and almost certainly not functional as-is).
Let's archive it so that it doesn't cause any confusion.
[ci:skip-vercheck]
[ci:skip-build]: we don't actually want to build test this thing
Recent kernel occupies 47120384 bytes in uncompressed state,
which is more than reserved memory for kernel
0x80000000 - 0x82800000 (40M).
Shift FDT image to give more memory space (56M) to load Linux.
Disable GPT to be able to chainload stuff on uSD from vendor u-boot on
internal eMMC. The vendor u-boot does not support GPT.
If booting is done by reprogramming the boot order or zeroing internal
bootloader, GPT is no problem.
[ci:skip-build]: already built successfully in CI
there is available qcom-msm8953 which is working with latest lk2nd fine on kuntao, but after flashing by building with device-lenovo-kuntao, it is resulting rebooting the system continuously with latest lk2nd, so imo it should be archived
Bootloader needs to be at 0x400 for IMX6 devices. That is ignored by
pmbootstrap which places the GPT header there. Revert to msdos partition
table style to workaround that bug.
What works:
* Flashing with heimdall and a SD card
* Networking over USB
* SSH over USB
* Splash screen (when booting from charging screen)
What doesn't work:
* Any other UI than "none" (they boot, but no graphics and no SSH)
Steps to flash:
* pmbootstrap init # Select samsung-loganrelte, select "none" as UI
* pmbootstrap build linux-samsung-loganrelte
* pmbootstrap build device-samsung-loganrelte
* pmbootstrap install --sdcard=/dev/sdX # doesn't boot from internal storage
* pmbootstrap flasher flash_kernel
The full initramfs is now too big for the boot partition.
When building with the downstream kernel, use initfs-extra
to split the initramfs so it can fit again.
This is not an issue with mainline kernel since booting it
uses extlinux with lk2nd.
[ci:skip-vercheck]
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
[ci:skip-build]: already built successfully in CI
Like most msm8974 devices, lk2nd is used to boot mainline linux on the
HTC One (M8).
Add it as a dependency of the mainline kernel build, so that it is built
when required. It can be flashed with 'pmbootstrap flasher flash_lk2nd'
while in the vendor bootloader fastboot mode.
Only extlinux mode is supported for mainline kernel, as otherwise the
initramfs is too big for the boot partition.
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Add the imagis and 88pm886_regulator drivers to the initfs allowing the
software keyboard in the debug shell to work.
[ci:skip-build]: already built successfully in CI
Otherwise the service will be installed even if the mainline kernel is
selected.
Fixes: f59eac28b ("firmware-samsung-pxa1908: move openrc scripts to subpackage (MR 5688)")
Convert the device package to use U-Boot.
The U-Boot binary is gzipped and put into a U-Boot legacy uImage to
match what the factory bootloader's demands. The postmarketOS kernel,
initramfs and device tree are packed into a FIT and passed to U-Boot as
an initramfs.
Basically linux-postmarketos-marvell-dove but with fellow changes :
1. Added support for other marvell SoC
2. The local version has been changed to -postmarketos-marvell
3. Several redundant USB controller driver has been removed
4. CONFIG_SATA_MV is seted to y
5. fbdev is disabled
6. CONFIG_ZRAM_BACKEND_ZSTD it enabled
(due to kconfig config but i also enabled CONFIG_ZRAM_BACKEND_LZ4 and
others)
7. neon is enabled
postmarketOS CI