These files are just a copy paste of the regular OnePlus 5 ones with
adjusted codename, display name and screen height.
The used kernel is linux-oneplus-msm8998 (shared with cheeseburger).
This is in preparation for adding in support for the OnePlus 5T
(dumpling) on top of the regular OnePlus 5 (cheeseburger).
Both devices use the same kernel so the name change just makes sense.
Might as well update the downstream kernel when someone (nathanchance)
is merging in updates as they come out for the linux-stable 4.4.y series
¯\_(ツ)_/¯
This fixes a bug where the package does not install some files as
expected.
For the librem5 package, this also generates the modemmanager
subpackage, which was missed in testing/review earlier.
This upgrades the package to include:
- Support for usb serial console (only in OS, not in u-boot)
- udev rule to fix phone calls with modemmanager using the
broadmobi modem in the phone
- The beginnings of usb network support (still not functional
yet)
- Enable framebuffer in the deviceinfo, pmos logo on boot!
The udev rule and module configs were gathered from upstream Purism
PureOS.
This adds new subpackages for phosh, plasma, and a new dependency on the
phone device package for wys (in Alpine Linux)
This adds subpackages for pulseaudio, phosh, and plasma mobile, and
includes some configuration files from upstream Purism for udev and
pulseaudio that help with audio a bit (though phone audio routing is
still weird/broken for now..)
The separate subpackages for phosh and plasma are necessary becuase they
each use a different modem handling daemon (modem manager and ofono,
respectively).
Add a vibration feedback, along with the LED feedback when booting.
This is suggested by TL Lim.
When trying to power up the phone with holding it in the hand, vibration
feedback is more obvious than LED.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Started porting pmOS to Xiaomi Redmi Note 5 Pro (whyred).
What works so far:
- Booting
- SSH over USB
- SD card detection (haven't tried flashing to internal storage because
i'm afraid of bricking the device due to anti-rollback)
- Vibration and LEDs
- Screen
- Hardware buttons
- Touchscreen
Untested:
- WiFi
- Camera
- Audio
- Bluetooth
- GPS
- Calls, SMS, Cellular network
- Proper WiFi support (building modules, firmware package)
- Architecture change to armv7
- Fix no MAC address on USB networking
[ci:skip-build]: already built successfully in CI
The datasheet says that the AT+QDAI audio routing configuration is saved
to non-volatile memory directly, and therefore needs a modem reset to be
applied.
This commits changes the audio routing configuration script to first
check for the current configuration, and only change it if it is
different from the one wanted.
The new configuration is then sent, and modem is reset to apply
configuration.
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
The pkgrel bump in !1032 got lost during a rebase, rebuild the package to fix:
ERROR: Could not find dependency 'modem-qcom-msm-mainline-common' in any aports folder or APKINDEX.
Combine modem-qcom-msm-{mainline,downstream}-common to a single APKBUILD
with mainline and downstream subpackages.
Enable rmtfs service here instead of directly in the package.
[ci:skip-vercheck]: for qrtr version fix
This device is probably broken at this point, but since we want to
remove linux-postmarketos-mainline/stable it really has best chances
to work (somewhat) on linux-postmarketos-qcom-msm8974.
This commit adds support for the Alcatel OneTouch Pop 7S (pop7lte),
a 2014 MSM8226-based tablet, using manufacturer's downstream kernel.
Currently working: display, USB networking, Weston
Firmware is packaged for WiFi and audio but the downstream kernel tree
doesn't seem to include drivers for the qcom wlan chip, only wcnss.
Additionally, audio mixer config is missing as I haven't been able to
find it in the stock Android 4.2.x ROM's filesystem yet.
Please note that this commit adds support *only* for model P330X,
which is not to be confused with similarly-named incompatible devices,
the Pop 7 (also 2014 w/ MT8312) and the Pop 7 LTE (2016 w/ MSM8909).
Signed-off-by: Lauren Kelly <lauren.kelly@msn.com>
All the downstream kernels reference ../../.shared-patches in their
symlinks. Now that we have moved device ports to device/testing/*,
those symlinks are no longer working.
Changing the path would require fixing all downstream packages *and*
a new pmbootstrap release. Overall it seems easier to move the
.shared-patches folder to device/.shared-patches.
Since it is only relevant for downstream kernel packages in device/
that might be a better place in general.
Prepare for better device categorization by moving everything to testing
subdir first.
[skip-ci]: chicken-egg problem: passing pmaports CI depends on pmbootstrap MR
depends on this MR
Related: postmarketos#16
pmbootstrap now configures consistent QEMU hardware for all architectures.
This means that the device package for amd64/aarch64 is now almost identical,
except for the architecture and the name of the serial port.
pmbootstrap always uses virtio-gpu now (but not necessarily virgl),
so there is only one consistent set of initfs modules we need to configure
for both architectures.
Also add the xfce4 package from amd64 to aarch64, exactly the same
problem with the wallpaper exists there.
We haven't been maintaining linux-postmarketos-mainline/stable very
well. Let's recommend use of one of the Alpine kernels which are actively
updated with new LTS updates (see #464).
This simplifies upcoming refactoring of the QEMU device ports,
which may (or may not) work with the more minimal kernel configurations
in linux-postmarketos-mainline/stable.
For some reason, the default SDL UI has been using 1024x768 for a while
now. This causes the splash screen to look weird because it is too small.
Now that pmbootstrap tries to configure 1024x768 in all cases
we can change the resolution for the device ports.
QEMU has its own DHCP server, which provides the necessary routes
and DNS server to access THE INTERNET. Trying to make QEMU provide
something similar to our usual USB network (by starting our our DHCP
server) will just confuse everything and break Internet access in most
cases.
Remove all our custom setup and let QEMU handle all the hard work.
mesa-dri-swrast and mesa-dri-virtio are actually provided by the same
package in Alpine now, so the selection in pmbootstrap does not have
any use. Always install mesa-dri-gallium instead.
Daniele Debernardi