[pi3]
#dtoverlay=clockworkpi-devterm-cm3
dtoverlay=clockworkpi-uconsole-cm3
dtoverlay=vc4-kms-v3d
dtparam=spi=on
dtoverlay=spi-gpio35-39
enable_uart=1

[pi4]
#dtoverlay=clockworkpi-devterm
dtoverlay=clockworkpi-uconsole
dtoverlay=vc4-kms-v3d-pi4,cma-384
dtparam=spi=on
# This restores UART0/ttyAMA0 by disabling BT
# without this, serial is only accessible through /dev/ttyS0
#dtoverlay=disable-bt
enable_uart=1


[pi5]
#dtoverlay=clockworkpi-devterm-cm5
dtoverlay=clockworkpi-uconsole-cm5
dtoverlay=vc4-kms-v3d-pi5,cma-384
dtparam=pciex1=off
dtparam=uart0


[all]
ignore_lcd=1
max_framebuffers=2
disable_overscan=1
dtparam=audio=on
dtoverlay=audremap,pins_12_13
dtoverlay=dwc2,dr_mode=host
dtparam=ant2
# enables built-in speakers
gpio=11=op,dh
initramfs initramfs

##only edit the section of the pi you have, other section will be ignored.
##if you have a devterm uncomment devterm and comment out entries with uconsole.