95 lines
2.8 KiB
Bash
95 lines
2.8 KiB
Bash
#!/bin/sh
|
|
set -eu
|
|
|
|
SIM_WAIT_TIME="${SIM_WAIT_TIME:-4}"
|
|
QMICLI_MODEM=
|
|
|
|
if command -v systemd-notify > /dev/null; then
|
|
trap '[ $? -eq 0 ] && systemd-notify --ready' EXIT
|
|
fi
|
|
|
|
case "$(cat /sys/devices/soc0/machine)" in
|
|
APQ*)
|
|
echo 'Skipping SIM configuration on APQ SoC.'
|
|
exit 0
|
|
esac
|
|
|
|
# libqmi must be present to use this script.
|
|
if ! [ -x "$(command -v qmicli)" ]
|
|
then
|
|
echo 'qmicli is not installed.'
|
|
exit 1
|
|
fi
|
|
|
|
# Prepare a qmicli command with desired modem path.
|
|
# The modem may appear after some delay, wait for it.
|
|
count=0
|
|
while [ -z "$QMICLI_MODEM" ] && [ "$count" -lt "45" ]
|
|
do
|
|
# Check if legacy rpmsg exported device exists.
|
|
if [ -e "/dev/modem" ]
|
|
then
|
|
QMICLI_MODEM="qmicli --silent -d /dev/modem"
|
|
echo "Using /dev/modem"
|
|
# Check if the qmi device from wwan driver exists.
|
|
elif [ -e "/dev/wwan0qmi0" ]
|
|
then
|
|
# Using --device-open-qmi flag as we may have libqmi
|
|
# version that can't automatically detect the type yet.
|
|
QMICLI_MODEM="qmicli --silent -d /dev/wwan0qmi0 --device-open-qmi"
|
|
echo "Using /dev/wwan0qmi0"
|
|
# Check if QRTR is available for new devices.
|
|
elif qmicli --silent -pd qrtr://0 --uim-noop > /dev/null
|
|
then
|
|
QMICLI_MODEM="qmicli --silent -pd qrtr://0"
|
|
echo "Using qrtr://0"
|
|
fi
|
|
sleep 1
|
|
count=$((count+1))
|
|
done
|
|
echo "Waited $count seconds for modem device to appear"
|
|
|
|
if [ -z "$QMICLI_MODEM" ]
|
|
then
|
|
echo 'No modem available.'
|
|
exit 2
|
|
fi
|
|
|
|
QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
|
|
|
|
# Fail if all slots are empty but wait a bit for the sim to appear.
|
|
count=0
|
|
while ! printf "%s" "$QMI_CARDS" | grep -Fq "Card state: 'present'"
|
|
do
|
|
if [ "$count" -ge "$SIM_WAIT_TIME" ]
|
|
then
|
|
echo "No sim detected after $SIM_WAIT_TIME seconds."
|
|
exit 4
|
|
fi
|
|
|
|
sleep 1
|
|
count=$((count+1))
|
|
QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
|
|
done
|
|
echo "Waited $count seconds for modem to come up"
|
|
|
|
# Clear the selected application in case the modem is in a bugged state
|
|
if ! printf "%s" "$QMI_CARDS" | grep -Fq "Primary GW: session doesn't exist"
|
|
then
|
|
echo 'Application was already selected.'
|
|
$QMICLI_MODEM --uim-change-provisioning-session='activate=no,session-type=primary-gw-provisioning' > /dev/null
|
|
fi
|
|
|
|
# Extract first available slot number and AID for usim application
|
|
# on it. This should select proper slot out of two if only one UIM is
|
|
# present or select the first one if both slots have UIM's in them.
|
|
FIRST_PRESENT_SLOT=$(printf "%s" "$QMI_CARDS" | grep "Card state: 'present'" -m1 -B1 | head -n1 | cut -c7-7)
|
|
FIRST_PRESENT_AID=$(printf "%s" "$QMI_CARDS" | grep "usim (2)" -m1 -A3 | tail -n1 | awk '{print $1}')
|
|
|
|
echo "Selecting $FIRST_PRESENT_AID on slot $FIRST_PRESENT_SLOT"
|
|
|
|
# Finally send the new configuration to the modem.
|
|
$QMICLI_MODEM --uim-change-provisioning-session="slot=$FIRST_PRESENT_SLOT,activate=yes,session-type=primary-gw-provisioning,aid=$FIRST_PRESENT_AID" > /dev/null
|
|
|
|
exit $?
|