Files
pmaports-rtwo/device/testing
snlavaiseandClaude Sonnet 5 caac069a36 motorola-rtwo: add qcom,msm-id + qcom,board-id + ramoops to the .dts
The Sony-modelled minimal DT was electrically correct (verified node by
node against the DTB LineageOS 23.2 actually boots: debug UART SE7,
eUSB2 phy+repeater, hsphy supplies pm8550vs_2_l1/l3 all match exactly)
but missing two things the stock firmware relies on:

 - qcom,msm-id = <0x218 0x20000 0x207 0x20000 0x207 0x10000 0x218 0x10000>
   qcom,board-id = <0x241 0xb1b0>
   The Motorola ABL selects a DTB out of a multi-FDT vendor_boot; without
   a matching SoC/board table it may reject our blob (-> no DT -> instant
   reset, which matches the <2s black-screen loop).

 - ramoops @ 0xae000000 (0x40000 console + 0x20000 record), copied from
   the stock DT. rtwo.config already builds CONFIG_PSTORE_RAM; with the
   node in place a failed boot's console can be read back from a later
   pmOS boot. No 'no-map' (arm64 ramoops needs the linear map).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QF5HebjUsRaxbW4cBX6HJP
2026-09-09 01:09:17 -03:00
..
2026-08-19 08:39:01 +00:00
2026-05-18 18:20:06 +00:00
2026-05-10 10:37:21 +02:00
2026-08-20 19:13:41 +00:00