Jens Reidel
544e4b6bd3
linux-rpi is a downstream Linux kernel provided by the vendor and differs a lot from mainline. As such, this device does not qualify for testing. Signed-off-by: Jens Reidel <adrian@postmarketos.org> Part-of: <https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/7319>
52 lines
1.2 KiB
Plaintext
52 lines
1.2 KiB
Plaintext
boot_delay=0
|
|
|
|
arm_control=0x200
|
|
|
|
kernel=vmlinuz-rpi
|
|
initramfs initramfs
|
|
|
|
gpu_mem=256
|
|
|
|
# uncomment line to enable serial on ttyS0
|
|
# NOTE: This fixes the core_freq to 250Mh
|
|
#enable_uart=1
|
|
|
|
# to take advantage of your high speed sd card
|
|
dtparam=sd_overclock=100
|
|
|
|
# use drm backend ( for weston and wayland )
|
|
dtoverlay=vc4-kms-v3d
|
|
|
|
# have a properly sized image
|
|
disable_overscan=1
|
|
|
|
# for sound over HDMI
|
|
hdmi_drive=2
|
|
|
|
# rotate the HDMI display
|
|
# 0 => no rotation
|
|
# 1 => 90 degrees clockwise
|
|
# 2 => 180 degrees clockwise
|
|
# 3 => 270 degrees clockwise
|
|
#display_hdmi_rotate=0
|
|
|
|
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
#dtparam=i2c_arm=on
|
|
#dtparam=i2s=on
|
|
#dtparam=spi=on
|
|
|
|
# Enable audio (loads snd_bcm2835)
|
|
dtparam=audio=on
|
|
|
|
# custom CVT mode for HDMI
|
|
# see https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
|
|
#hdmi_group=2
|
|
#hdmi_mode=87
|
|
#hdmi_cvt 800 480 60 6 0 0 0
|
|
|
|
# Automatically enable Bluetooth without having to use btattach
|
|
# Note that the Pi's Bluetooth interface is connected via hardware UART;
|
|
# if you intend to use it for other purposes (for example, serial debugging)
|
|
# comment out the line below.
|
|
dtparam=krnbt=on
|