Fix that building phosh, gnome, plasma-mobile images fails with:
==> Generating vmlinuz.kpart
Building depthcharge image for board 'Unnamed veyron board' ('veyron').
Couldn't build a small enough image for this board.
Related: https://builds.sr.ht/~postmarketos/job/1422513#task-img-1544
Related: bpo issue 153
[ci:skip-build]: already built successfully in CI
The Khadas VIM3 [1] is a popular devboard (SBC).
It has an Amlogic A311D SoC and is well supported in mainline linux.
Add board support in testing.
Note that we use the soc-amlogic-s905 package which also provides
support for A311d.
[1] https://www.khadas.com/vim3
Signed-off-by: Mattijs Korpershoek <mattijs.korpershoek@gmail.com>
Installation of lang gets moved from pmbootstrap to pmaports, since
pmbootstrap previously had installed lang only on non-default locale
systems. With this change also systems on the default locale can switch
between languages.
Closes: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/issues/3314
[ci:skip-vercheck]: only _pmb_recommends was changed
[ci:skip-build]: already built successfully in CI
At first fix issue #3315 caused by config file snippet openbox/rc.xml. The
snippet results in unresponsive window headers after changing the Openbox
theme. The Openbox settings GUI ObConf-Qt is not set up to handle config
snippets. Therefore replace the snippet by the full file of openbox/rc.xml.
The issue was investigated at:
https://github.com/Mikachu/openbox/issues/23
Secondly custom Openbox themes of dark style Onyx and bright style Clearlooks
with larger window buttons are added.
Thirdly the default Openbox theme is set to custom Clearlooks with larger
window buttons and additionally the Openbox font size is increased.
Detailed changelog of GitLab repository antoni.aloytorrens/lxqt-tablet:
- Increase Openbox font sizes
- Set default Openbox theme to "Clearlooks-L" with larger buttons
- Add custom Openbox themes Clearlooks with larger window buttons
- Add custom Openbox themes Onyx with larger window buttons
- Set the number of desktops to two again
- Restore full openbox/rc.xml config file
[ci:skip-build]: already built successfully in CI
Alpine now ships compressed firmware, so the old firmware file name is no
longer available, causing wl1251-cal to fail. Fix by manually creating the
expected uncompressed file.
Additionally, wl1251-cal has not been running early enough in most cases,
causing the kernel to use default nvs. Fix by blacklisting the driver and
probing it after the correct nvs has been extracted and saved.
[ci:skip-build]: already built successfully in CI
The kernel couldn't be compiled. Additional patches were necessary to compile the linux kernel again.
[ci:skip-build]: already built successfully in CI
This does not yet switch to mainline wifi driver [^1]. I will do that later
so that if that needs to be reverted the kernel upgrade itself can stay.
[^1]: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/issues/3420
[ci:skip-build]: already built successfully in CI
modules-initfs: Add touchscreen and panels, drop gpi and spi
1. Add the touchscreen (nt36xxx-spi), panels (panel-huaxing-nt36672c,
panel_tianma_nt36672c) and wled to modules-initfs, as these drivers
have been switched to modules.
2. Drop GPI and SPI from the module list as they have been configured
as built-in within the kernel.
Refine nonfree firmware dependencies:
1. Removed the common GPU firmware package from soc-qcom-sm7150 and
subsequently re-added it to firmware-xiaomi-surya in earlier commits.
We now ensure the GPU ZAP firmware is installed by adding
firmware-xiaomi-surya-gpu as a dependency to nonfree_firmware.
2. Incorporated firmware-xiaomi-surya-sensors into nonfree_firmware,
following its prior inclusion in firmware-xiaomi-surya.
3. Extended the integration of the soc-qcom-sm7150-libssc-180-degrees
udev rule into nonfree_firmware, building on its earlier addition to
soc-qcom-sm7150.
4. Install firmware unconditionally and provide a path for hexagonfs.
The Xiaomi POCO X3 NFC (xiaomi-surya) has two possible panel variants:
Huaxing and Tianma. The kernel dts file has been split to accommodate
these variants. Update the device package to enable panel selection
during the pmbootstrap init.
Co-authored-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
1. Added maintainers information.
2. Use a new method for firmware installation.
3. Add firmware for sensors.
Co-authored-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Drop the signed A615 GPU ZAP firmware from soc-qcom-sm7150 due to
compatibility issues causing crashes on Xiaomi (sweet/courbet) devices.
This firmware will be re-added in device-specific firmware packages
without being added to initramfs modules. Removing this firmware from
initramfs modules will not impact FDE functionality, as it is not
necessary for basic image display on panels.
Removal from initramfs modules is due to a change in the path to the
A615 GPU ZAP firmware, now device-specific.
Depend on new alsa ucm config package.
Add hexagonrpcd as a dependency and enable the
hexagonrpcd-adsp-sensorspd service for SSC.
Implement accel libssc_180_degrees mount matrix:
Introduce new udev rules tailored for Xiaomi devices (surya/davinci)
and potentially applicable to a broader range of sm7150 devices.
These rules are added to the SoC package and will be set as dependencies
in device packages for nonfree_firmware in subsequent commits.
Drop userspace pd-mapper, we have switched to the in-kernel
pd-mapper.
Add bootmac to set bt mac address.
Install nonfree firmware unconditionally.
Co-developed-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Co-developed-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Also add config to rmtfs so systemd starts stuff in the correct order.
I added the msm-modem unit here instead of in pmaports/modem/msm-modem
because systemd-services handles creating boilerplate install scripts
automatically.
fixes#3451
[ci:skip-build]: already built successfully in CI
Pablo Correa Gómez