Add the firmware for the CyberTan WC121.
Configuration is added in the newest firmware-linux release, so
complete support will appear in the corresponding Alpine package soon.
[ci:skip-build]: already built successfully in CI
mDNS queries and replies are sent to port 5353.
Update firewall rule in order to make it as tight as possible.
[ci:skip-build]: already built successfully in CI
Protect script when ram_freq is not set
Safely load PSCI DTO to enable CPUidle driver: psci_idle
The PSCI DTO shall only be applied if TF-A & Crust
support CPU idle states [0]. Otherwise the CPU usage
will be at 100%. This will not be visible in top,
lead to overheating and battery drain.
Worst case scenario would lead to a fried chip if
the CPU thermal_zone does not work or is not enabled
in DTS.
[0] https://gitlab.com/postmarketOS/pmaports/-/issues/1901#note_1238456920
I have enough other devices to care about, and honestly haven't touched
my PinePhone in a while. Remove myself as Co-Maintainer from all
relevant packages.
[ci:skip-vercheck]: No rebuild necessary
[ci:skip-build]: Doesn't change resulting packages
This installs zram-init and sets it to start on boot for all
devices/UIs. The included conf.d/zram-init also allows diabling using
zram swap or overriding the size by using a deviceinfo var.
I did an analysis of the pmos base install size with the 'none' UI
selected, after depending on zram-init, and the following new package is
installed:
zram-init-11.1-r1 installed size: 40 KiB
These packages are dependencies of zram-init, however they are already
installed in the base image (with 'none' UI) so they are not counted
above:
util-linux-misc-2.38.1-r0 installed size: 6816 KiB
e2fsprogs-extra-1.46.5-r4 installed size: 1324 KiB
So this seems like a very small price to pay for the benefit of not
making the logic/implementation more complicated than this.
* Starting busybox syslog ... [ ok ]
ssh-keygen: generating new host keys: RSA ECDSA ED25519
* Starting sshd ... [ ok ]
zram swap: activating with size: 243 MB
* Loading zram module...
[ ok ]
* Swap->zram0
[ ok ]
* Starting local ... [ ok ]
This change introduces one new deviceinfo variable:
deviceinfo_zram_swap_pct: percentage of RAM to use for zram swap
Default percentages if the second var is unset are explained in the
zram-init file this commit adds. A value of 0 disables zram swap.
fixes#1133
This wifi module doesn't ship with the L5, but I have one because it's
generally more stable than the redpine thing that does ship with the
L5... however there's a known problem with having PM enabled on it.
This adds a NM config option, that matches specifically on this
device/driver, to disable wifi. PM for the redpine should not be
affected by this config change.
[ci:skip-build] already built successfully in CI
This moves unl0kr and all of its dependencies into the initramfs-extra,
it does so by using a relatively new mkinitfs feature for installing
files into the -extra archive.
[ci:skip-build] already built successfully in CI
By positioning this after extracting the initramfs-extra archive, we can
allow udev to exist in the -extra archive and not have any size impact
on the base initramfs archive.
Any hook that needs udev in the initramfs can get that support, provided
that the hook lists udev requirements in the .files config for it.
Make use of stock depthcharge bootloader to not deal with U-Boot issues:
- broken USB
- broken eMMC
- broken latest version of U-Boot
Use extlinux instead of Grub for users with U-Boot to simplify process.
Also, some of old U-Boot builds may not support EFI.
[ci:skip-build] already built successfully in CI
Make use of stock depthcharge bootloader to not deal with U-Boot issues:
- broken USB
- broken eMMC
- broken latest version of U-Boot
Use extlinux instead of Grub for users with U-Boot to simplify process.
Also, some of old U-Boot builds may not support EFI.
[ci:skip-build] already built successfully in CI
Alex