For some reason, the default SDL UI has been using 1024x768 for a while
now. This causes the splash screen to look weird because it is too small.
Now that pmbootstrap tries to configure 1024x768 in all cases
we can change the resolution for the device ports.
QEMU has its own DHCP server, which provides the necessary routes
and DNS server to access THE INTERNET. Trying to make QEMU provide
something similar to our usual USB network (by starting our our DHCP
server) will just confuse everything and break Internet access in most
cases.
Remove all our custom setup and let QEMU handle all the hard work.
mesa-dri-swrast and mesa-dri-virtio are actually provided by the same
package in Alpine now, so the selection in pmbootstrap does not have
any use. Always install mesa-dri-gallium instead.
Adds samsung-matissevewifi support using msm8916-mainline/linux kernel.
- Device can boot.
- USB network is working.
- Can connect to device using SSH.
- Update to Linux 5.6-rc5
- Basic audio support on samsung-gt510wifi (speaker is WIP)
- Initial support for samsung-matissevewifi
- Enable some kernel config options for elogind/Anbox/fbkeyboard
All device ports have been changed in one of the previous commits,
so do one pkgrel bump for all of them using:
$ pmbootstrap pkgrel_bump device-*
[ci:ignore-count]
Attempting to use a stable device path there does not actually work,
so we might as well remove it and hope that directfb can now automatically
detect the touchscreen for osk-sdl.
Most devices do not need to set any of these variables.
directfb can now automatically detect touchscreens, calibration is
only needed for resistive touchscreens and dev_keyboard is unused.
Automatically done using:
- sed -i '/deviceinfo_dev_keyboard=""/d' device-*/deviceinfo
- sed -i '/deviceinfo_dev_touchscreen=""/d' device-*/deviceinfo
- sed -i '/deviceinfo_dev_touchscreen_calibration=""/d' device-*/deviceinfo
Audio stopped working after alsa-lib-1.2.1, this patch fixes it
by adapting it to ucm2 format.
As well as some improvements to HiFi:
- Remove SpeakerMic as it was just HandsetMic without conflict
with Speaker
- Remove some unnecessary conflicts with ports
- Add input/output priorities
Co-Authored-By: Asriel Dreemurr <asriel.danctnix@gmail.com>
This adds basic functionality for the Moto One Hyper.
The device boots with rootfs on sd, booted by 'pmbootstrap flasher boot'.
USB net works, and i can ssh in. There is no framebuffer device, but
weston works with the drm backend instead of fbdev. Touchscreen support
is not implemented yet, but i will update this with support when i get
the chance. Most other functionality either does not seem to work yet or
has not been tested (wifi, audio, modem, etc).
CONFIG options added:
- nvidia tegra partition support (now it's kernel option)
- CONFIG_SECCOMP support (needed for Epiphany and lot of others)
- CONFIG_USER_NS required for bubble wrap (used by Epiphany)
- CONFIG_TEGRA_SOCTHERM as module, required for thermal management
DTS change:
- grouper we all have has codename "tilapia" (w/ GSM), since no-one had "older" grouper
- in future, when we get testing, we'll add "real" grouper (wo/ GSM)
- no functional change in DTS (except wiring SMB347 driver)
Kernel changes:
- added SMB347 driver support (now it's able report charging state)
Signed-off-by: David Heidelberg <david@ixit.cz>
v2:
- Also switch firmware/firmware-asus-flo
- fix linting warnings
device/linux-asus-flo/APKBUILD: IC:[AL6]:device/linux-asus-flo/APKBUILD:36:prefix custom variable with _: HOSTCC="${CC:-gcc}"
IC:[AL6]:device/linux-asus-flo/APKBUILD:37:prefix custom variable with _: HOSTCC="${HOSTCC#${CROSS_COMPILE}}"
IC:[AL6]:device/linux-asus-flo/APKBUILD:39:prefix custom variable with _: ksrcdir="$srcdir/linux-$pkgver"
MC:[AL5]:device/linux-asus-flo/APKBUILD:10:variable set to empty string: depends=""
MC:[AL5]:device/linux-asus-flo/APKBUILD:13:variable set to empty string: install=
MC:[AL5]:device/linux-asus-flo/APKBUILD:30:variable set to empty string: subpackages=""
MC:[AL31]:device/linux-asus-flo/APKBUILD:36:variables must not have capital letters
MC:[AL31]:device/linux-asus-flo/APKBUILD:37:variables must not have capital letters
MP:[AL32]:device/linux-asus-flo/APKBUILD:3:unnecesary usage of braces: ${_flavor}
MP:[AL32]:device/linux-asus-flo/APKBUILD:4:unnecesary usage of braces: ${_flavor}
MP:[AL32]:device/linux-asus-flo/APKBUILD:32:unnecesary usage of braces: ${pkgver}
firmware/firmware-asus-flo/APKBUILD: MC:[AL28]:firmware/firmware-asus-flo/APKBUILD:12:literal integers must not be quoted
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:15:unnecesary usage of braces: ${_url_aosp}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:15:unnecesary usage of braces: ${_version_broadcom}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:16:unnecesary usage of braces: ${_url_aosp}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:16:unnecesary usage of braces: ${_version_qcom}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:22:unnecesary usage of braces: ${_commit_other}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:24:unnecesary usage of braces: ${_commit_other}
MP:[AL32]:firmware/firmware-asus-flo/APKBUILD:24:unnecesary usage of braces: ${_url_other}
Signed-off-by: David Heidelberg <david@ixit.cz>
These dependencies don't belong here.
- iw: should be installed by the user themselves when wanted
- nano: should be installed by the user themselves when wanted
- pulseaudio: should be installed by the UI meta packages that need it
instead
- pulseaudio-alsa: should automatically be installed when both
PulseAudio and alsa are installed
https://gitlab.alpinelinux.org/alpine/aports/merge_requests/4820
Minecrell