Initial support for Sony Xperia XA (codename: sony-tuba). Builds, can be
flashed, ssh connection through usb works, display works, touchscreen works,
no wifi or anything else.
According to the wiki pages, some interfaces can't be built for the
armhf architecture. This device is configured to armhf but it actually
supports armv7 architecture. Tested with a samsung-i9300.
This adds emoji support to the squeekboard emoji picker, and to any apps
that might want to display emojis (chatty, firefox, text editor, etc)
Thanks @vurpo for the tip.
We have tried out lightdm-mobile-greeter for three weeks, but let's remove
it again from the default install.
The greeter behaves completely different from the Phosh (or any other
UI's) lockscreen, therefore it provides a bad user experience. Not only
the design is different, but it also can't display the same information
as the Phosh lockscreen. You can't accept a call coming in while the
greeter is displayed, and whatever other features will be added to the
lockscreen in the future would not be in the greeter (e.g. making a photo
without logging in, emergency calls without login, ...).
It's clear to me now, that postmarketOS in the default installation
should install one UI in single-user mode, and that UI should use its
lockscreen to display all login screens. The case of having multiple UIs
installed at the same time is used rarely, so instead of optimizing for
it, document how to enable a greeter after the installation in the wiki:
https://wiki.postmarketos.org/wiki/Configure_postmarketOS_for_multiple_UIs_or_users
Besides the strong reasons above to ship with no greeter at all, we had
problems with lightdm-mobile-greeter in particular:
* It did not work with Plasma Mobile
* When HDMI was plugged in, the greeter was not usable (especially
annoying, because Phosh tends to crash after plugging in HDMI, so it
would go back to the greeter which then means you need to reboot)
This reverts commit be693339ec.
This new version:
- Upgrades device config from upstream to v25
- Fixes a problem using modesetting driver on Xorg (lightdm
was broken because it now uses Xorg)
- Override GDK to use GLES (change from upstream Purism)
cpio expects a newline-separated list of files from stdin by default,
and you can change that to a NULL-terminated list of files by using the
'-0' switch.
Previously we were passing a NULL-terminated list ('-print0') and using
cpio with the default setting. For some reason busybox cpio works with
that but GNU cpio doesn't like that and generates an initramfs without
any files (as it only gets "a single file").
With this change the initramfs generation works fine with both busybox
cpio and gnu cpio.
Fixes#815
Replace the old downstream port with a new aarch64 port running the
linux-postmarketos-qcom-msm8916 close-to-mainline(TM) kernel.
Most of the functionality is working:
- USB Network
- Storage (eMMC, SD card)
- Display, brightness control
- Touchscreen, buttons
- IMU (accelerometer+gyroscope)
- Notification LED
- Sound (Speaker, Headphones, Microphones)
- WiFi, Bluetooth
- Modem (SMS, voice calls, mobile data)
Coming soon (hopefully): Battery/Charging, USB-OTG (not working yet)
There are many variants of the device, so more changes to handle
differences between them may be needed in the future. For now,
the only relevant difference is the required modem firmware:
- wt88047 (global variant)
- wt86047 (China variant)
... have different kind of modems and they do not seem to work with
the firmware of the other one. The way this is handled in this device
package is that there is a separate kernel variant for both of them.
All other required firmware can be shared, and therefore there is no
differentiation needed when using the kernel variant without modem.
I renamed "wingtech-wt88047" to "xiaomi-wt88047".
My reasoning for that is the following:
- Wingtech is the ODM (original design manufacturer), they designed the
hardware and (probably) manufactured it. But postmarketOS port applies
to the combination of both hardware and firmware, and the firmware was
at least partially provided by Xiaomi.
- wt88047 looks lonely with the "wingtech" vendor, when all other Xiaomi
devices use "xiaomi", even though many from them were probably also
designed by Wingtech.
- We don't use the ODM hardware name for other devices either, e.g.
"wileyfox-crackling" would be "longcheer-l8150" with the same approach.
I think the port is better visible as "xiaomi-wt88047" (too bad Xiaomi
seemingly did not have a proper codename for this device...)
In preparation for adding mainline device port for Xiaomi Redmi 2
(wt88047), remove the downstream device port. It's still armhf
which makes it clear that it hasn't been tested for a long time.
The mainline port has many more features, also it is aarch64, which
is not compatible with the downstream kernel.
- Update to Linux 5.9-rc7
- Add "BAM DMUX" driver as network interface to the modem
for mobile data
- Major rewrite/cleanup of all MSM8916 device trees
- Lots of cleanup everywhere
- I hope I did not forget something :)
Devices:
- bq-paella: Add vibrator
- samsung-j5nlte: Add display
- samsung-a2015 (a3u/a5u): Fix USB-OTG detection
- "Initial" support for Xiaomi Redmi 2 (wingtech-wt88047)
- USB
- Storage (eMMC, SD card)
- Display, brightness control
- Touchscreen, buttons
- IMU (accelerometer+gyroscope)
- Notification LED
- Sound
- WiFi, Bluetooth
- Modem
- Initial support for Motorola Moto E 2015 (motorola-surnia)
- USB
- Storage (eMMC, SD card)
- Display, brightness control
- Touchscreen, buttons
- WiFi, Bluetooth
- Battery status
- Initial support for Samsung Galaxy Grand Prime
- USB
- Storage (eMMC, SD card)
- Initial support for Oppo Mirror 5s (oppo-a51f)
- USB
- Storage (eMMC, SD card)
- WiFi, Bluetooth
Actually the display has been working in initramfs since MR 1261
(device-bq-paella: enable display and touchscreen on boot).
We should make it explicit in deviceinfo.
Since
https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/12086 the
Cheese application won't be installed anymore unless explicitely
specified. Applications that usually depend on it now depend on
cheese-libs instead.
This means we can stop hiding it and allowing people to install it
themselves if they want too
This application doesn't work 100% when launched from the 'desktop', but
it is still useful as a handler for opening image files from a file
browser, so the icon is hidden.
eog is a nice image viewer that works pretty well on a
touchscreen/mobile display.
Nemo is a file manager from the Cinnamon desktop project, which forked
from Nautilus some time ago. It is much more usable than Nautilus on a
touchscreen/mobile display.
Set eog as default app in mimeapps.list, so it even works when hiding
the launcher with postmarketos-hidden-desktop-entries (we'll hide it,
because it doesn't work when opened directly; no image is shown and
opening a file does not work either). The list of associated mimetypes
is taken from here:
https://gitlab.gnome.org/GNOME/eog/-/blob/master/data/org.gnome.eog.desktop.in.in
device-motorola-ocean: Add support for both downstream and mainline
kernel
device-motorola-ocean: Update dependency for downstream kernel
The dependency mentioned is wcnss-wlan.
Apply 1 suggestion(s) to 1 file(s)
Device package changes:
- Replace ALSA configs with dependency (soc-sprd-audio-sc8830)
- Add reboot-mode as dependency
Kernel package changes:
- Use dtbtool-sprd instead of dtbtool
- Move code and device tree to external repo
- Add patch for GCC10
- Add patches for framebuffer
Otto Urpelainen