Some kconfig changes to reduce kernel size to avoid conflict of 0x8000
(kernel load address) + uncompressed kernel size (arch/arm/boot/Image) +
compressed kernel size (arch/arm/boot/zImage) being bigger than
0x1e00000 (tags address).
This causes mostly silent boot failures, with CONFIG_DEBUG_LL messages
such as "no ATAGS support: can't continue" or "Error: invalid dtb and
unrecognized/unsupported machine ID" can be seen on UART, though they're
not very clear that the kernel image is essentially too big for what lk
is setting up.
Manual kconfig changes:
* Convert some =y to =m to reduce kernel size, mostly NFS_FS and CIFS
since those are quite big and there's no point in having them
built-in.
* Disable EXT2_FS & EXT3_FS - handled by EXT4 driver
* Disable PCI - unused
[ci:skip-build]: already built successfully in CI
Update the bot email address, and don't enable the script for local CI
since it relies on protected GitLab CI variables. This could be fixed in
the future by safely handling these not being available.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Per the flatpak manpage, repos can be configured OOTB by dropping config under /etc/flatpak/remotes.d. Using the install script requires doing stuff over the internet, which may not always work at image build time. By using the drop-in file, we avoid having to connect to flathub.
The manpage only mentions /etc/flatpak, and nothing about /usr ...
Quite a messy upgrade due to changes in both abuild and in the upstream
gcc APKBUILD breaking various things. Pmbootstrap also seems to
misbehave in GitLab CI making it difficult to validate.
Manual fixups:
* Set !tracedeps - changed behavior in abuild
* Manually add "so:" dependencies to avoid issues with !tracedeps set
(becomes obvious with crossdirect)
* Add back makedepends="$makedepends_build $makedepends_host"
* Disable move of some files into usr/lib to avoid
ERROR: gcc-aarch64-14.2.0-r4: trying to overwrite usr/lib/libgcc_s.so.1 owned by libgcc-14.2.0-r4.
[ci:skip-build] # pmbootstrap bugs will prohibit this from building
# anyways, don't even attempt
Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
And re-enable riscv64 as the latest commits have added
support for riscv64.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
[ci:skip-build]: already built successfully in CI
Technically this option can be configured in the Gitlab UI, but I spent
about 3 hours debugging a CI failure caused by it being too low and
I don't want to risk forgetting this can happen later if/when someone
decides to lower it in the UI. By setting it here, we can have some
context/history about why.
This fixes the CI in !5688
Also see:
https://docs.gitlab.com/17.4/ee/user/project/repository/monorepos/index.html#shallow-cloning
[ci:skip-build]: already built successfully in CI
I was confused for a while about why the SHA printed by CI differed from
the actual upstream/master SHA:
commit upstream/master: f822b7ee0d06f05ff6d2eb37bcf4a1825569be692
real upstream/master: 822b7ee0d0
With the new changes in lk2nd that allow us to support extlinux.conf,
we can now generate image that would be generic to these devices.
[ci:skip-build]: already built successfully in CI
Include Qualcomm display subsystem and Adreno GPU driver, along
with panel driver into initramfs.
And mark devices as GPU accelerated to allow using all the UIs.
This release has several little but neat fixes not really worth
mentioning, but most notable features are:
* Xiaomi Mi PAD 4 and PLUS (clover) *both* now have proper panel
driver and full GPU support. On par with other our devices now.
Thanks to @kubntd for code and @barni2000 for testing !
* ath10k wlan no-msa-indication hack was dropped in favor of
solution that was accepted upstream.
* Adreno 5xx preemption fixes were also included.
This package is not buildable for riscv64 and ppc64le. Devices that use
megapixels should depend on it explicitly.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Our regular initramfs imports eudev and its rules, so we need to make
sure that we update the initramfs if they change
[ci:skip-vercheck]: version bump not needed
[ci:skip-build]: already built successfully in CI
This also adds a PPP bypass, so that traffic can flow through the native
interface (rmnet0) directly, and not via the emulated PPP.
[ci:skip-build]: already built successfully in CI
The Makefile of swclock-offset was previously changed to install the scripts
according to the /usr merge. In the service files for openrc and systemd,
however, the paths to the scripts need to be adapted as well. Version 0.2.4
catches up on this.
[ci:skip-build]: already built successfully in CI
Manual kconfig changes:
* Switch DRM_MSM & panel driver back to =y, seems to improve display
issues a bit
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2969
[ci:skip-build]: already built successfully in CI
- now installs to /usr by default
- now installs systemd service files by default
- added -systemd subpkg to handle service files
[ci:skip-build]: already built successfully in CI
MR 5540 breaks the Enter key label in onboard OSK with LXQt and Mate. In
theory Droid can be used instead, but it actually does not work.
We can't use _pmb_recommends here since v24.06 -> v24.12 upgrade will
break onboard unless any package depends on font-dejavu.
Signed-off-by: Masanori Ogino <mogino@acm.org>
[ci:skip-build]: already built successfully in CI
Luca Weiss